Seller purchased trailer in 2011. Completly reconditioned. Excellent shape. Have used 15 times in 7 years.
Tires good 80% plus
Ready to haul
Wt 68,000 Lbs
10 ft wide
Length 108 ft stretched out - 80ft stacked
6 Axle



Location: Hastings, Michigan

Location: Genoa, NY

New: 1986
3,100 Hours
Boom with Stand
14 ft forks
Counter wts.
Lift capacity of 48,000 Lbs 

Location: Livonia Mich

Location: Milwaukee, WI
Buyer Responsible For Loading

Professional 5 Control / Fanuc 31I
Pallet Size (Metric Type) ..... 500 mm x 500 mm/19.7" X 19.7"
Axis Travel X, Column Longitudinal ..... 730 mm/28.7"
Axis Travel Y, Spindle Vertical ..... 650 mm/25.6"
Axis Travel Z, Table Cross ..... 730 mm/28.7"
Spindle Center to Top of Pallet ..... 80 - 730mm/3.1"- 28.7"
Spindle Nose to Center of Pallet ..... 70 - 800mm/2.75"- 31.5"
Spindle Drive Motor (Continuous) ..... 18.5 kW AC/25HPAC
Spindle Speed ..... 50 to 12,000 RPM
Floor Space (L x W) w/o Accessories ..... 2,600 mm x 4,602 mm/102" x 182"
Weight with ATC 60 ...... 9500 kg/20,900 lb.
Workzone Limitations ..... 800 mm dia. x 1000 mm ht./31.5" x 39.4"
CAT 40, 134 Tools Matrix Magazine

View Full Machine Specs Here



Location: Albia, IA
Buyer Responsible For Loading

Rousselle #3E

25 tons
4" stroke
16-1/4 shut height
 20 x 14 bed area
135 spm
2 hp motor

Location: Thomaston CT
Seller can load

Center Heights 10.2"
Distance Between Centers 59.1"
Swing Over Bed 20.5"
Swing Over Cross Slide 10"
Swing Over Saddle Wings 17.7"
Slide Travel In/Out (X Axis) 11"
Linear Carriage Travel (Z Axis) 61.2"
Bed Width 13.4"
Bed Height 13.2"
Spindle Nose A2-6
Spindle Bore 2.56"
Speed Ranges 3 - 3000 RPM
Motor 15 HP
Rapid Traverse Z-Axis 394 IPM
Rapid Traverse X-Axis 394 IPM
Max Quill Stroke 5.12"
Quill Diameter 3.15"
Quill Taper Hole 4MT
Approx Dimensions 148" x 66"
Approx Weight 8,250 lbs.

Location: Hermann, MO
Buyer Responsible For Loading

Watch Video

Six head production mill.

This system is equipped with six spindles with an additional
six piggy back spindles that run in line with the main spindle, this machine
has been utilized in machining high volume plastic, this multi head mill has
a 5’ x 10’ vacuum operated table with automatic loading and unloading shuttles.

The lead conveyor is an automatic feeding conveyor that supplies
pre cut material to the loading table.

The second conveyor stages the 12 parts for alignment for the
automatic loading shuttle, the shuttle will pick up the production
part with vacuum suction cups and transfer them to location on the mill table.

The shuttle places the production part on the milling table to be machined.

Once machined the unloading shuttle removes production parts from
the working surface. (12 parts at a time.) and transfer them to the
unloading conveyor.

NOT INCLUDED: Dust Collector and Vacuum System

Location: Spring Lake, MI
Rigger required. $2500 to load. Two Flatbed trailers needed to transport.

New:1983
SN:42960

Overall length of bed:14'
Distance between housings:12'6”
Equipped with dual palm buttons and foot pedal control.
Bed plate requires a small pit approximately 12” deep.
Brake is not equipped with any back gauge.
Bending capacitiy in Mild Steel:
3/8” x 12' 5”
1/2” x 12'
5/8” x 8'6”
Full tonnage at low or medium speed: 350 Tons
Tonnage in high speed: 140 Tons
Standard stroke length: 10”
Throat clear from center of dies: 10”
Open height: 18”
Closed height: 8”
Ram speed, high speed: 65 IPM
Medium speed: 33 IPM
Low speed: 9 IPM
Return speed: 67 IPM
Motor H.P.: 30
Tooling Included:
Comes with die holder & 4-way die.
Ram is machined for angle brackets.
Approximate dimensions:11'2” tall x 14'6” overall length x 72” F-B.
Approximate weight:44,000 Lbs.
Electrics:480 Volt, 3 phase.

Location. Near Columbus, IN
Seller Will Load

Specifications:
Table Size: 30" x 112"
T-Slots: 18mm x 5
Travel, X-Axis: 98.4"
Travel, Y-Axis: 35"
Travel, Z-Axis: 28"
Max. Table Load: 4,000 Lbs.
Spindle Nose to Table, Max: 32"
Distance, Spindle CL-Column: 35"
Spindle Speed: 8,000 RPM
Spindle Taper: 40 CAT
Spindle Motor, 100% Duty: 15HP
Weight: 18,000 Lbs.

Location: New Philadelphia, OH
Buyer Responsible For Loading

High speed three-axis milling machine with very high rigidity for maximum precision and better surface quality. The numerical control created specifically for these milling machines guarantees high dynamics particularly in the machining of 3D molds

All bearing supports and nuts of the feed drives are cooled in order to achieve the best accuracy.

Axis X = 31.5”
Axis Y = 23.5”
Axis Z = 15.5”

Spindle nose maximum height-22”table top

Table: Dimensions – 35.5” X 27.5”
Maximum load: 1763 lb

Axis motors: AC water-cooled synchronous motors and preloaded ball screws without clearance

Advances: from 0 to 2362 in / min. on all the axes

Cabin: Fully enclosed, safety glass, excellent visibility, 3 doors; possible to load pieces from above

Hermetic closure: The machine is equipped with a patented sealing system; all components are protected against dust infiltration; graphite cast iron and plastics can also be machined by attaching an industrial vacuum cleaner.

Numerical control for high speed manufacturing (HSC Röders Type Rms6 Ver 3.30 (381)

Push-button panel: For manual control of the axes and centering of a workpiece, for tool changing and for adjusting the feed speed (override)

Tool changer: 30 seats, with collision detector, loadable during processing

Blum tool measuring laser: Built-in tool change, automatic tool length compensation, tool diameter measurement and tool breakage control

Minimal cooling lubrication: Micro-jets, appliance for cooling and lubrication jet with two-component nozzles, without the need for disposal.

Parts cleaning: Compressed air nozzles for cleaning the parts, integrated in the Z axis

Tool cleaning: Compressed air nozzle for cleaning before laser measurement

Chip evacuation: Two augers, shavings container on ...